Repairs explained
Screen replacement: what is actually done, how long it takes, what can go wrong
Short version
- “The screen” is a bonded assembly: glass + touch + display (OLED or LCD). The whole assembly is replaced, not just the glass.
- Bench order: backup → heat on the edges → opening → the battery is disconnected first → small parts move to the new screen → new seal → test, only then closing.
- The price is set by the part (original or compatible, OLED or LCD) and the model — which is why two quotes differ so much.
- What can go wrong: face or fingerprint unlock, sensors, auto-brightness, the water seal — all of them are checked before handover.
- At pick-up you test: touch everywhere, cameras, a call, unlocking — and on iPhone also Parts and Service History.
What “the screen” actually is
When a shop says “we replace the screen”, it swaps the whole front assembly: the cover glass, the layer that feels your finger (the digitizer) and the display that draws the picture. In the factory the three layers are fused into one, like the sheets of a layered pastry — which is why the whole assembly goes, even when only the glass cracked. Samsung sells the official part as a “screen kit”, and at Apple a screen repair means the whole display.
3D phone. Highlighted parts: screen, screen adhesive.
The display inside the assembly comes in two kinds. On OLED each pixel makes its own light — that is where the deep blacks, the thin screens and the fingerprint readers under the glass come from. On LCD one shared lamp shines through the pixels, like a tiny common projector — older, cheaper tech found on mid- and low-range phones. An OLED costs several times more than an LCD as a part, the first reason the same “screen replacement” is priced differently on two models.
The second consequence: what you see after the repair depends on the quality of the assembly fitted, not only on the phone model. Two screens “for the same phone” can look different — colours, brightness, how they answer touches — because the factory and the part grade differ. What each grade means is detailed in part grades and original vs compatible.
How the repair unfolds, stage by stage
The order differs from one model to another — some phones open from the front, on others the back cover comes off first — but the skeleton is the same. These are the stages of a careful replacement, as the makers' own repair guides describe them:
Assessment and preparation
The technician works out what actually broke — only the glass, or also the display, the frame, a camera — and makes the quote. Samsung says the same on its preparation page: a backup before anything, because data can be lost. On Galaxy phones you also turn on Maintenance mode, which hides your photos and accounts for the duration of the repair — the path is at the end of this section.
Opening it
The phone is powered off, the SIM tray comes out first — Samsung warns that taking it apart with the tray in place can damage the device. The edges are warmed with a controlled source (in Samsung's guide, a heating pouch that stays under 65 °C), then a suction cup and a thin pick slice the adhesive all around. Without heat, the screen comes off hard and can scratch or crack worse.
The battery is disconnected first
It is the bench rule everywhere: with the phone open, the battery connector is unplugged before any other connector, so nothing stays live while work goes on. Only then do the connector covers and the screen's flex cable come off — you can see them underneath, in the picture below.
Small parts move to the new screen
A new display rarely arrives “complete”: on many models the earpiece, the front camera and the sensor group sit on the old screen and move to the new one, and on phones with a home button or a fingerprint reader on the glass those cross over too. On Samsung, the “screen kit” is the entire front assembly — the mainboard, cameras and speakers all move into it.
New seal, then the test — not the other way round
The old adhesive is cleaned off the frame and a new gasket ring is fitted — Samsung's programme even brings new screws for reassembly. The screen is connected and the phone is powered on before closing: touch, brightness, cameras, sensors. If something is wrong, it is fixed on the spot, while the phone is still open.
3D phone. Highlighted parts: screen, flex cable, connector covers.
Only at the very end is the phone closed: the screen is pressed evenly onto the gasket and the adhesive is left to do its job, then a full check is run — the same one you can repeat at pick-up, described a few sections below.
At drop-off
Assessment and quote: what broke, which part goes in, what is promised. The backup stays your job.
Opening
Heat on the edges, SIM out, the adhesive cut carefully — the fiddliest part on an already cracked screen.
The swap
The battery is disconnected first, the display comes off, small parts move to the new assembly.
Testing and closing
The phone is powered on while still open, everything is checked, only then is the screen pressed onto the new gasket.
One thing is your job, not the shop's: the preparation. On Galaxy phones, Maintenance mode hides your photos, messages and accounts and leaves only the preinstalled apps — the phone restarts clean and comes back to normal only with your code:
Menu path, screen by screen: 1. Settings: Connections — Wi-Fi • Bluetooth • SIM manager; Notifications; Display; Battery and device care ←; About phone. 2. Battery and device care: Battery; Storage; Memory; Maintenance mode ←. 3. Maintenance mode: Turn on ←
Why prices differ so much
Two quotes for a “screen swap” on the same phone can be far apart — and usually not because one of them is expensive for no reason. The difference comes down to a few clear things:
- The part: original, quality compatible or cheap copy — the biggest difference in the quote sits here, and it shows after fitting.
- The technology and the model: a flagship OLED costs several times a mid-range LCD as a part; Samsung publishes per-model repair estimates.
- With or without the frame: on many models the screen comes bonded into a new frame, gasket included — pricier as a part, safer as a fit.
- Collateral damage: a bent frame, a swollen battery or a damaged sensor only shows at teardown and changes the quote.
- The steps after fitting: on iPhone the display is also electronically linked to the phone — time a serious shop puts into the job.
| The part | What you see after fitting | The compromise |
|---|---|---|
| Original / service pack | Picture, brightness and touch as from the factory; on iPhone it shows as “Genuine” | Most of the quote is the part |
| Quality compatible | Good picture and touch, usually hard to tell apart in daily use | Factory calibration may be missing; on iPhone it stays “Unknown” |
| Cheap copy | Shows and answers, but you can tell | Weaker brightness, washed-out colours, touch that misses — Apple lists exactly these on nongenuine displays |
How to tell an original part after the repair is the story in original screen or not. And when you want a concrete number for your model, ask for a quote — a serious quote comes after the assessment, not before.
What can go wrong — and how a careful shop prevents it
Most complaints after a screen replacement come from a short list. Each has a cause and a prevention:
| What can go wrong | Why it happens | How it is prevented |
|---|---|---|
| Face or fingerprint unlock stops working | The biometric modules sit on the old screen or are electronically bound to the board | The parts are carefully moved to the new assembly; unlocking is tested before closing and fingerprints are re-enrolled |
| Auto-brightness goes haywire | The light sensor sits in the group that transfers — Apple names it among the first to fail on nongenuine displays | The sensor group is moved over and tested with the phone still open |
| Washed-out colours or missing True Tone (iPhone) | The display was not linked to the phone or is not genuine | A genuine part and linking through “Repair Assistant”, as Apple describes |
| The phone is no longer sealed | The old gasket was sliced at opening | A new gasket and even pressing — even so, Samsung states plainly that IP performance is not guaranteed when the repair is done by the user or an unqualified person |
| Something rattles or heats inside | A forgotten screw or plate stays loose inside | Every screw and cover goes back in place — Apple warns loose parts can reach the battery and overheat |
| A raised edge or a new crack within days | Dust left under the gasket, reused adhesive, weak pressing | Clean surfaces, a fresh gasket every time, even pressure all around |
Note· On iPhone, the phone itself tells the truth
The same holds for water resistance: a new gasket helps, but no repair can promise the factory IP rating — Apple says clearly that resistance fades with wear anyway, and the full story is in water resistance and IP68.
3D phone. Highlighted parts: screen, screen adhesive.
What to check when you pick it up
The ten minutes at the counter are worth more than any promise. Check on the spot, before you leave:
0 of 10 done
Gesture on the phone screen: Draw across the whole screen — any break is a dead zone.
On iPhone 11 and newer — except iPhone SE — there is proof in the menu: after a repair, About shows “Parts and Service History”, and next to “Display” you can read whether the part is “Genuine” or “Unknown”.
Menu path, screen by screen: 1. Settings: Airplane Mode (off); Wi-Fi; Bluetooth; Notifications; Focus; Screen Time; General ←; Control Centre; Display & Brightness. 2. General: About ←; Software Update; AirDrop; iPhone Storage; Keyboard; Language & Region; Transfer or Reset iPhone. 3. About: Name — iPhone; iOS Version — 18.2; Model Name — iPhone 15; Parts and Service History — Display — Genuine ←
Tip· Something wrong? Say it on the spot
How long it takes, honestly
No figure quoted on the spot means much — the duration depends on three things that only show after the assessment:
- The model: on phones that open from the front, the screen is almost the first thing out; on those where every component moves into the new assembly, the repair is a full “transplant”.
- The part: if the assembly is in stock, the swap happens the same day on most common models; if it has to be ordered, the wait is the supplier's, not the bench's.
- The checks afterwards: a replacement that ends with testing and linking (as the iPhone asks) takes longer than a “fitted and done” one — and it is worth the difference.
As an order of magnitude: on common models with the part in stock, the swap itself usually takes between under an hour and a few hours, and many repairs finish the same day. On fully-glued models, on those moving the whole interior into the new frame, or where the part only arrives by order, it can pass a day.
The part you control is the preparation: backup, the account password at hand, maintenance mode where it exists — the full list is in before you hand it in. For a diagnosis and a quote on your model, see the service page or ask for a quote.
Frequently asked questions
On a cracked screen, is only the glass replaced or the whole screen?
Why do screen replacement prices differ so much?
Will I lose my photos and messages when the screen is replaced?
Is the phone still water-resistant after a screen replacement?
How can I tell a genuine screen was fitted?
Why did my fingerprint or face unlock stop working after the screen swap?
Does your phone look different, or is something missing here?
Menus and buttons differ from model to model and change with updates. If these steps do not match your phone or you cannot find what you need, tell us your model and what you see on the screen: we will answer you and update the guide.
Checked against
- Apple — Despre afișajele iPhone originale
- Apple — Servicii și reparații Apple pentru ecranele de iPhone
- Apple — Despre rezistența la stropire, apă și praf a iPhone
- Apple — Ghidul de utilizare iPhone: ce este în Configurări
- Samsung — Cum să îți pregătești dispozitivul pentru reparație
- Samsung — Cum utilizezi Modul de întreținere
- Samsung — Repararea pe cont propriu a ecranului telefonului
- Samsung — Estimare cost reparație
Related guides
Cracked screen: can you keep using the phone?
Three levels of damage, the risks of carrying on and the emergency protection until repair.
10 min · Anyone can do it
Is the screen or battery original? How to tell
Where the phone itself lists its parts, and the tell-tale signs of a non-original screen or battery.
10 min · Needs care
Water resistance (IP67, IP68): what it means and why it fades
What IP67, IP68 and IPX8 really promise — and why that lab promise fades with every drop.
10 min · Anyone can do it
Warranty and your rights on repairs in Romania
Two years of rights against the seller, free repair within 15 days, and what to do when they refuse — the rules, in short.
10 min · Anyone can do it
Before you hand your phone to a repair shop: the full checklist
Backup, privacy mode, SIM and eSIM, passwords, IMEI and pickup tests — everything to do before the repair shop.
20 min · Anyone can do it
Screen test: dead pixels, burn-in and dead touch zones
Run the screen tester: full colours, a touch grid and multi-touch — for dead pixels, burn-in and dead touch zones.
10 min · Anyone can do it
Screen asking for a replacement?
Bring it in for a diagnosis — we work out what actually broke and which part is worth fitting, and you see the quote before any work starts.