XGSM Iași — Service & Piese GSM

Test your phone

Screen test: dead pixels, burn-in and dead touch zones

Put the screen on solid colours, sweep your finger across a grid and see how many touches it registers at once — everything runs right here on the page, nothing to install. That's how you catch dead pixels, burn-in shadows and zones that no longer respond to touch, whether you're testing your own phone or one you're about to buy.
Anyone can do it10 minAndroidSamsungXiaomiHuaweiMotorolaGoogle PixelOnePlusOppoiPhoneChecked: November 17, 2026

Short version

  • Start the tester below: six solid colours for pixels and blotches, a grid for touch and a multi-touch counter.
  • A black dot on every background = dead pixel; a lit dot on black = stuck pixel; a shadow visible on grey = burn-in (OLED).
  • Cells your finger can't light up = dead zones on the touch layer.
  • Cells lighting up without a touch = ghost touches — see the ghost-touch guide.
  • Dead pixels, lines or burn-in ⇒ usually a screen replacement — colour-tint issues are sometimes just settings.

The test runs right here, on the page

Below are three tests that run in your phone's browser, with no apps to install and no account: full-screen colours, a touch grid that lights up as your finger passes, and a multi-touch counter. Nothing is saved and nothing is sent over the internet — it's just your screen and your finger.

🖼️ Screen tester

Runs right on this page, on your phone or computer. Nothing is saved or sent.

Exit any time with Esc or the ✕ button — in colours and grid also with a two-finger tap.

  1. Clean the screen and set the lighting

    Wipe the glass with a soft cloth — dust and grease marks look like dead pixels. Raise brightness to about 80–100% and, if you can, test in a dark room: high contrast makes dots and blotches stand out.

  2. Start the colour test

    The screen fills, in turn, with white, black, red, green, blue and grey. Tap for the next colour. On each one, look carefully across the whole screen, especially the corners and edges.

  3. Draw through the touch grid

    Sweep your finger across the whole screen — horizontally, vertically and along the diagonals. Every cell you touch lights up; the counter shows how many remain untouched.

  4. Place several fingers at once

    The multi-touch test counts how many touches the screen registers simultaneously. Put down 2, 3, 5 fingers — if the number is lower than the fingers placed, some touches aren't registering.

Tip

On some browsers and on iPhone, true fullscreen may be refused — the test works just as well in the panel that covers the screen. Exit any time with Esc or the ✕ button; in the colours and grid tests a two-finger tap also exits.

What to look for on each colour

Each colour reveals something different, so don't skip any. Look at the screen straight on, not from the side: on OLED displays colours shift slightly at an angle, and that's normal behaviour, not a defect — Apple itself says so on its Super Retina display page.

The test colours
White
Black
Red
Green
Blue
Mid grey

Phone screen: The test colours: White, Black, Red, Green, Blue, Mid grey

Six solid colours, in this order. On each one you look for dots that don't change hue and blotches that don't match the rest of the screen.
  • White: yellowish or pinkish patches, uneven brightness, black dots (a dead pixel is easiest to spot here).
  • Black: dots that stay lit — stuck pixels. On OLED, in a dark room, black should be almost invisible; on LCD a faint glow at the edges is common.
  • Red, green, blue: darker dots = dead sub-pixels. The colour should be uniform everywhere.
  • Mid grey: this is where the keyboard, the status bar or the navigation buttons leave their mark — that's burn-in.

Burn-in, or image retention, means the OLED screen's pixels have worn unevenly: elements that sit on screen all the time — the status bar, the keyboard, the navigation buttons — leave their shadow behind. It builds up over months or years of the same static image at high brightness, and it's permanent: no software can undo it. Tell it apart from *image persistence*, a shadow that fades by itself after a few minutes of normal use — that's temporary and not a defect, as Apple also explains.

OLED screen (Samsung, iPhone, Pixel)

dead pixels, burn-in, green tint or flicker at low brightness

LCD / IPS screen

dark corners, light bleed at edges, yellowish blotches

At a wide angle

slight colour shift — normal on OLED, not a defect

Not fixable in software

dead pixels, lines, dead zones, burn-in

Note

Before blaming the screen for a yellow tint, check the filters: on Samsung look under Settings → Accessibility → Visibility enhancements → Colour filter and Settings → Display → Blue light filter, and on any phone turn off night mode too. An active filter changes the colour uniformly, across the whole screen.

The touch test, explained

The touch grid shows you what the screen's touch layer sees. Sweep your finger everywhere, then draw straight lines along the diagonals: a line that keeps breaking in the same spot, or a cell that won't light on a second pass, means a dead zone.

PhoneMessagesBrowserCamera
Draw lines across the whole screen, edges included

Gesture on the phone screen: Draw lines across the whole screen, edges included.

Edges matter: that's usually where the first dead zones hide — and where a damaged flex gives up.
  • Dead zone: a strip or patch of cells that never lights up — usually a fault in the touch layer, often after a drop or a crack.
  • Lines that break: the stroke stops at the same point every time — again the digitizer, or a flex with a poor contact.
  • Cells lighting on their own: the screen registers touches you didn't make. Those are “ghost touches” — see the dedicated guide, because some causes are mundane: a wet screen, damp hands or a poorly fitted protector.

Warning· Before you call it a dead zone

A screen protector with adhesive only on the edges — not across the whole surface — can leave unresponsive zones, Samsung warns. Remove the protector, clean the screen, dry your hands and retest. On Samsung you can turn on Settings → Display → Touch sensitivity, and on Pixel there's Settings → Display & touch → Touch sensitivity.

Touches registering during calls, at the edges or where you didn't touch are, on iPhone, a classic symptom of a non-genuine display — Apple lists them among the signs of a screen fitted outside authorised service. See how to check whether a screen is original.

The maker's option: tests built into the phone

The same kind of tests ship inside the phone from the factory — handy when you want a second method's confirmation or you're testing without internet:

  • Samsung: the Samsung Members → Diagnostics → Phone diagnostics → Test all app flow also checks the touchscreen; *#0*# in the Phone app opens the hardware tests — see the Samsung codes guide.
  • Xiaomi, Redmi, POCO: the CIT hardware test menu — how to open it.
  • Huawei, Honor, Motorola, OnePlus, Oppo, Realme: each has its own test code or menu — the full list.
  • Pixel: Settings → Device health & support (Pixel 6 and later), and on Pixel 9 and later there's also Display & touch → Touch diagnostics.
  • iPhone: there's no built-in test menu — the tester on this page does the same job; you can also check whether the screen was replaced (below).
One UI
Samsung Members
Diagnostics
Support
Step 1
Diagnostics
Phone diagnostics
Error reports
Step 2
Phone diagnostics
Test all
Battery status
Touch screen
Sensors
Speaker
Step 3
Diagnostics › Phone diagnostics › Test all

Menu path, screen by screen: 1. Samsung Members: Diagnostics ←; Support. 2. Diagnostics: Phone diagnostics ←; Error reports. 3. Phone diagnostics: Test all ←; Battery status; Touch screen; Sensors; Speaker

The official route on Samsung — the same diagnostics are reachable from the app's Support tab.
RED
GREEN
BLUE
RECEIVER
VIBRATION
MEGA CAM
SENSOR
TOUCH
SPEAKER
SUB KEY
FRONT CAM
GRIP SENSOR

Phone screen: RED, GREEN, BLUE, RECEIVER, VIBRATION, MEGA CAM, SENSOR, TOUCH, SPEAKER, SUB KEY, FRONT CAM, GRIP SENSOR

Samsung's *#0*# menu: RED/GREEN/BLUE fill the screen for the pixel test, TOUCH draws a grid like the one on this page. The buttons are always in English and the grid differs between models.
iOS
Settings
General
Accessibility
Step 1
Settings
General
About
AirDrop
CarPlay
Step 2
General
About
Name
iOS Version
Model Name
Serial Number
Parts and Service HistoryDisplay · Genuine
Step 3
General › About › Parts and Service History

Menu path, screen by screen: 1. Settings: General ←; Accessibility. 2. General: About ←; AirDrop; CarPlay. 3. About: Name; iOS Version; Model Name; Serial Number; Parts and Service History — Display · Genuine ←

On iPhone 11 or newer (iOS 15.2+, excluding iPhone SE), Parts and Service History tells you if the display was replaced and whether the part is Genuine or Unknown — useful before buying second-hand.

What your findings mean

The test results, in plain words
What you see in the testWhat it usually isFixable?
Black dot on every colourDead pixelNo — the panel gets replaced
Lit or coloured dot, visible on blackStuck pixelSometimes fades alone or after colour cycling
Keyboard or status-bar shadow on greyBurn-in — OLED wearNot reversible; the panel gets replaced
Shadow that fades within minutesTemporary image persistenceYes — it fades by itself
Green or pink line, usually verticalPanel or flex faultNo — screen replacement
Dark corners or edgesWorn LCD backlightNo — screen replacement
Grid cell or strip left untouchedDigitizer fault — or edge-adhesive protectorSometimes — in settings; otherwise the panel
Cells lighting without a touchGhost touchesSometimes — charger, protector or the screen
Uniform yellow tint everywhereColour filter or night mode onYes — in settings

When the verdict is “the panel gets replaced”, see what the repair involves in the screen replacement guide and how parts differ in part grades — a cheap screen can mean washed-out colours, low brightness and a less accurate touch.

Note

Before you declare the panel faulty, run the updates: for flickering, green-tinted or lined screens, Google's first official Pixel recommendation is Settings → System → System update. A tint that survives the update is usually hardware.

When the test becomes a repair-shop job

Some results have no at-home fix. Google says it plainly for Pixel: a screen with dead pixels or physical damage → repair. The same holds on any brand for green or pink lines, large dead strips and visible burn-in.

  • One or more dead pixels constantly in your way — they don't go away.
  • Lines that survive a restart and an update — see the black screen and green lines guide.
  • Dead strips in the grid covering keys or buttons — typing becomes impossible there.
  • Visible burn-in in normal use, not just on mid grey.
  • Ghost touches continuing with the charger unplugged and a clean screen.

Buying a second-hand phone? Run the test in front of the seller — it takes two minutes and it's the most direct proof. The full used-phone checklist is in the dedicated guide.

Tip

Got the phone back after a screen replacement? Run the test on the spot, before leaving the shop: a dead zone, a strange tint or a dead pixel on the new panel is best sorted out on the bench, not a week later.

If the test turned up dead zones, lines or a burn-in shadow and you're not sure what you're seeing, write to us or bring the phone in — on the bench we can usually confirm quickly whether it's the panel, a flex or just a setting.

Common testing mistakes

Do

  • Test in a dark room and look at the screen head-on, not from the side.
  • Run the colours at high brightness, then check for flicker at minimum brightness too.
  • Retest without the protector and with dry hands before calling a zone dead.
  • Note or photograph with another phone where the dead zone is — it helps the diagnosis.

Don't

  • Don't press hard on the screen to “wake” a pixel — you can damage the touch layer.
  • Don't judge tint with the blue-light filter or night mode on.
  • Don't mistake the off-angle colour shift for a defect — it's normal on OLED.
  • Don't install “dead-pixel fixer” apps — a dead pixel is a hardware fault, not a software one.

Frequently asked questions

How can I tell if my screen has dead pixels?
Run the colour test above and look closely at each screen: a dot that stays black on every colour is a dead pixel. If the dot stays lit and shows mainly on black, it's a stuck pixel — frozen on, not off. Both are panel defects, but a stuck pixel can sometimes fade on its own.
Can a dead pixel be repaired?
Not by software or apps — it's a physical fault in the panel. The real fix is a screen replacement; if the dot is small and doesn't bother you, you can live with it. A stuck pixel (coloured, not black) sometimes fades alone or after colour cycling, but it's not guaranteed.
What is burn-in and does it go away?
Burn-in (image retention) is uneven wear of an OLED screen's pixels: elements shown on screen all the time leave a shadow you notice mostly on grey. It's permanent — it doesn't fade and software can't undo it. Image persistence, a shadow that fades within minutes of normal use, is temporary and not a defect.
Why doesn't part of my screen respond to touch?
The likeliest cause is a digitizer fault — the layer that reads touches — usually after a drop. But first rule out the mundane: remove the protector (some have edge-only adhesive and leave dead zones), clean the screen and restart the phone. On Samsung you can raise Touch sensitivity in Settings → Display, and on Pixel Touch sensitivity under Display & touch.
How do I check a second-hand phone's screen before buying?
Run this page's test in front of the seller: the colours reveal dead pixels and burn-in, the grid reveals dead zones. On iPhone 11 or newer (except SE) also check Settings → General → About → Parts and Service History — it shows whether the display was replaced and whether the part is genuine. The full checklist is in the used-phone check guide.
What does a green or pink line on the screen mean?
It's usually an OLED panel fault or a damaged flex connecting the screen to the board — sometimes after a drop, sometimes with no obvious reason. It doesn't go away with a restart or updates, and the real fix is a screen replacement. Details and exceptions in the black screen and green lines guide.
Does the screen test harm the phone or drain the battery?
No — it only displays colours across the screen, like any video or game. At high brightness it uses about as much power as a normal app, and a few minutes of testing affects neither the battery nor the screen.

Does your phone look different, or is something missing here?

Menus and buttons differ from model to model and change with updates. If these steps do not match your phone or you cannot find what you need, tell us your model and what you see on the screen: we will answer you and update the guide.

Checked against

Found something that doesn't work?

Send us your test results — we'll tell you what the repair involves.