Test your phone
Signal strength: reading the real numbers, not the bars
Short version
- Bars aren't comparable between phones: every maker draws them differently. The real figure is in dBm — negative, and closer to zero means better.
- On Android you read it under Settings → About phone → Status / SIM status; on iPhone you dial
*3001#12345#*and look forRSRP. - As a rough guide on 4G/5G: down to -100 is the zone where things work well, -110 is weak, below -120 is nearly dead.
- Phone or network? Compare figures with another phone on the same carrier, in the same spot — or move your SIM into another phone.
- Indoors, Wi-Fi calling (VoWiFi) and VoLTE help the most: calls over the internet or straight on 4G, with no extra app.
Why the number matters, not the bars
The bars next to the 4G or 5G icon look the same everywhere — but every maker decides for itself what one bar means, so the same signal can show as three bars on one phone and two on another. They're not even stable on the same phone: an update or a different network type can shift the thresholds. That's why “I have two bars” means nothing you can compare.
The figure every phone measures the same way is called signal strength, expressed in dBm (decibel-milliwatts): how much of the energy the carrier's antenna puts out actually reaches your modem. The value is always negative — the closer to zero, the stronger the signal: -60 dBm is excellent, -120 dBm is nearly nothing.
Connection: Your phone via the signal measured in dBm → The carrier's mast.
Note
Where to read the real number
On Android the value lives in the SIM status screen — the path differs a little from brand to brand but ends in the same place. On iPhone nothing in Settings shows it: the only route is the hidden Field Test app. Pick your brand:
Open Settings → About phone
The last entry on the main settings screen.
Go into Status information
The phone status screen: SIM, IMEI, serial number.
On some older models the path is Settings → About phone → Status → SIM card status.
Tap SIM card status
On dual SIM there's an entry for each slot. The figure that matters is the Signal strength row — for example
-95 dBm 45 asu.
Menu path, screen by screen: 1. Settings: Connections — Wi-Fi, Bluetooth, Airplane mode; Notifications; Display; Software update; About phone ←. 2. About phone: Status information ←; Legal information; Software information. 3. Status information: SIM card status ←; IMEI; Phone number. 4. SIM card status: Network — Orange RO; Signal strength — -95 dBm 45 asu ←; Mobile network state — Connected; Roaming — Not roaming
Open Settings → About phone
It's the last entry in the settings list.
Tap SIM status
The screen lists the network, the connection types and roaming state — all read live.
Read the Signal strength row
The value in dBm, plus the
asuvariant. The same path works on Motorola, Nokia and other near-stock Android phones.On some phones the entry is called Status or sits directly in About phone. Also see the hidden
*#*#4636#*#*menu, which shows the same figure.
Menu path, screen by screen: 1. Settings: Network & internet — Mobile data, Wi-Fi, hotspot; Connected devices; Apps; Notifications; Battery; About phone ←. 2. About phone: Device name — Pixel 9; Model & hardware; SIM status ←; Android version — 16. 3. SIM status: Network — Orange RO; Signal strength — -95 dBm 45 asu ←; Mobile voice network type — LTE; Service state — In service; Mobile network state — Connected
Open Settings → About phone
It's usually the first row of the settings screen.
Go into Detailed info and specs
The full list of hardware and version details.
On some builds the same screen is called
All specsorAll parameters(older MIUI), orInformații detaliate și specificațiiin Romanian.Tap Status, then SIM status
Pick the SIM slot if you have two. The figure that matters is Signal strength.
Menu path, screen by screen: 1. Settings: About phone — HyperOS • Android ←; Wi-Fi; Bluetooth; Display; Apps. 2. About phone: HyperOS version — 2.0; Android version — 15; Detailed info and specs ←. 3. Detailed info and specs: Model number; Android version — 15; Kernel version; Status ←. 4. Status: Battery level — 84%; SIM status (slot 1) ←; SIM status (slot 2); IMEI. 5. SIM status (slot 1): Network — Orange RO; Signal strength — -95 dBm 45 asu ←; Mobile network type — LTE; Service state — In service; Roaming — Not roaming
Open the Phone app
The same keypad you dial numbers on.
Type
*3001#12345#*and press the call keyYou're not calling anyone — after a few seconds the hidden Field Test app opens.
Phone keypad. Dial the code *3001#12345#*.
Look for the
RSRPreadingOn recent iOS versions it shows on the app's main board; on others it sits in the top-right menu, under
LTE→Serving Cell MeasorRAT→Cell Info. Look for the lettersrsrp, not a fixed path — the menus change between versions.Read the number and walk around
RSRPis the real signal in dBm. The iPhone shows this figure nowhere in Settings — Field Test is the only built-in route. More in the iPhone codes and Field Test guide.
Tip
Tip
How good is your number
No list can give you the exact threshold: the same dBm can feel “decent” on one network and “borderline” on another, because dBm measures the strength of the signal, not the noise around it (interference from neighbouring cells). As an everyday reference on 4G and 5G, the orientation below holds in most cases.
| dBm (approximate) | Level | What it's like in practice |
|---|---|---|
| -50 to -80 | Excellent | Everything flies: clear calls, maximum speed. |
| -80 to -100 | Good | Calls and data with no trouble — where most phones sit. |
| -100 to -110 | Fair | Works, but it's touchy: indoors it can drop into the weak zone. |
| -110 to -120 | Weak | Calls may drop, data turns slow. |
| below -120 | Nearly nothing | It may still show a bar, but drops often — effectively no service. |
Phone screen: Signal strength: -95 dBm. asu 45, Network type LTE
The painful end is the other one: below -110 dBm the phone cranks up its transmit power and keeps hunting for a better cell, so it burns through the battery even while idle. Weak signal is also a common reason calls drop or voices go underwater.
Phone screen: Signal strength: -118 dBm. asu 22, Network type LTE
Note· Two details before you compare
asu — the same reading on a different scale; if you want a single number to track, stick to dBm. And always compare within the same technology: -90 dBm on 2G and -90 dBm on 4G are not the same experience, the scales differ.The phone or the network?
With the real figure in hand you can answer the question that matters: is the phone or the coverage at fault? Three tests bring the truth out — all without tools.
Compare with another phone on the same carrier
In the same spot and at the same time, look at the dBm on a phone with a SIM from the same carrier. A 3–5 dBm difference between models is normal; if yours sits 15–20 dBm lower all the time, the phone is suspect.
Move your SIM into another phone
Put your SIM in a phone that reads well and check the same figure. If it stays poor there too, the SIM (worn out) or the network is to blame — not your phone.
Check the coverage map
ANCOM's map aisemnal.ro shows voice signal actually measured on the street, for every carrier — not only promised. Careful: it measures outdoors and only for voice, so it says nothing about your living room or about 5G. Each carrier also publishes its own map, e.g. Orange and Vodafone. While you're at it, ask your carrier whether your area has an outage or works — masts break down too.
Connection: Your phone via signal that can't get through (broken) → The carrier's mast.
Tip· The golden rule of diagnosis
There's a middle case: the SIM itself can be at fault, especially one that's many years old or was hand-cut from a bigger format. A replacement SIM from your carrier is usually cheap or free and removes the third variable from the equation.
How to talk better indoors
Thick walls, metal-coated double glazing and basements are the enemies of mobile signal — and you can't move the carrier's mast closer. Two features of your phone sidestep the problem entirely and work in Romania:
- Wi-Fi calling (VoWiFi) — you talk through your home internet, with your usual number, from the Phone app. At Orange it's called Apel Wi-Fi, at Vodafone it shows as Wi-Fi calling or VoWiFi, at Digi it's listed as VoWiFi; it's billed like a normal call, nothing extra.
- VoLTE (4G calling) — you talk straight on the 4G network instead of the phone falling back to 2G: clearer sound and calls connect almost instantly. Keep in mind 3G is nearly gone in Romania, so VoLTE is close to mandatory for clean calls.
Where you turn them on, by brand:
- Samsung: Settings → Connections → Wi-Fi Calling. The same option is in the Phone app → the ⋮ menu → Settings.
- Pixel and near-stock Android: Settings → Network & internet → SIMs → your SIM → Wi-Fi calling; the VoLTE toggle sits on the same screen.
- Xiaomi, Redmi, POCO: Settings → SIM cards & mobile networks (on HyperOS it may be called
Mobile networks) → your SIM → look forVoLTEand the Wi-Fi calling option. With some carriers the rows are hidden — they appear only if the network offers the service. - iPhone: Settings → Cellular → Wi-Fi Calling → Wi-Fi Calling on This iPhone →
Enable. VoLTE is usually on automatically; at carriers that still show the toggle, it's under Cellular Data Options → Voice & Data.
Menu path, screen by screen: 1. Settings: Airplane Mode (off); Wi-Fi — HomeNet; Bluetooth — On; Cellular ←. 2. Cellular: Cellular Data (on); Cellular Data Options; Wi-Fi Calling ←; Calls on Other Devices. 3. Wi-Fi Calling: Wi-Fi Calling on This iPhone (on) ←; Update Emergency Address
Note
On the physical side: next to a window or on a balcony the figure almost always climbs by a few dBm — try that before moving house. Cases with metal parts and magnetic mounts can shave a few dBm off, and the “signal boosters” sold online are not something you install yourself: a GSM repeater is regulated equipment and in Romania it can only be used with the carrier's agreement.
When it's the phone's fault
Sometimes the carrier's antenna is innocent and the phone is the one with problems. The typical signs:
- Poor figures everywhere — not only at home, but in any location and with any SIM you try.
- It started after a drop — the phone's antenna is a web of metal strips and contact pads along the frame; an impact can loosen the contacts or break a trace.
- It started after a repair — a non-original back cover or a misplaced screw can leave the antenna without its contacts.
- A big gap versus other phones — the test above, in short: yours sits 15–20 dBm below the rest all the time.
What you can check yourself, no screwdriver needed: take the case off (especially the ones with metal or magnets), pop the SIM tray out and back in, update the system and restart the phone. If the SIM is many years old, replacing it at your carrier removes a cheap cause. Step by step, the whole diagnosis is in the “No signal / SIM not detected” guide.
If the tests keep pointing at the phone (poor figures on every network, in every place), the honest next step is a bench diagnosis — the antenna contacts and the modem are quick to check in a repair shop. See the service page.
Do
- Compare dBm with another phone before blaming the carrier.
- Rerun the test with the case off — metal really does matter.
- Check whether the phone is still under warranty before any opening.
Don't
- Don't install “signal booster” apps — no software can make the physical antenna better.
- Don't stick “antenna” stickers on the phone — they change nothing about reception.
- Don't open the phone to “fix” the antenna — the contacts get damaged even quicker.
Frequently asked questions
What does a good signal look like in dBm?
Why do I have four bars but the internet is slow?
How do I see signal strength in dBm on iPhone?
*3001#12345#* in the Phone app and press the call key — Field Test opens, where you look for RSRP or rsrp0. The iPhone shows this figure nowhere in Settings, so Field Test is the only built-in route.If I move my SIM to another phone and the signal is just as weak, is the network at fault?
Are there apps that improve signal?
What is VoWiFi and how does it help me at home?
My signal is between -110 and -120 dBm. Can I do anything?
Does your phone look different, or is something missing here?
Menus and buttons differ from model to model and change with updates. If these steps do not match your phone or you cannot find what you need, tell us your model and what you see on the screen: we will answer you and update the guide.
Checked against
- Google — Găsirea producătorului și a operatorului de telefonie mobilă
- Google — Remedierea problemelor de conectivitate mobilă (Pixel)
- Samsung — Cum verifici starea cartelei SIM pe Galaxy
- Apple — Efectuarea unui apel cu serviciul Apelare Wi-Fi
- Apple — Folosirea tehnologiei 5G cu dispozitivul iPhone
- ANCOM — aisemnal.ro, harta măsurată a acoperirii cu semnal mobil
- Orange — Serviciul Apel Wi-Fi
- ANCOM — Amplificatoarele de semnal GSM, puse în funcțiune doar cu acordul operatorilor
Related guides
No signal, 'Emergency calls only' or SIM not detected
No bars or the SIM isn't read? The tests that pinpoint who's at fault — the card, the account, the network or the phone.
15 min · Anyone can do it
Android's hidden info menu *#*#4636#*#*: signal, network and forcing 4G or 5G
The *#*#4636#*#* code opens Android's testing menu: real signal numbers, network type and how to force 4G/5G — plus the risks.
10 min · Needs care
iPhone codes and Field Test mode
No hidden test menu on iPhone — what actually works: Field Test for signal, network codes and Apple's own diagnostics.
10 min · Anyone can do it
Sharing your phone's internet: Wi-Fi hotspot and USB
Your phone becomes a router: Wi-Fi hotspot, USB or Bluetooth tethering — plus data use and fixes.
10 min · Anyone can do it
Wi-Fi or Bluetooth won't turn on, or turns itself off
Wi-Fi switch grey or dropping by itself? The tests that show whether it's a setting, the router or the chip on the board.
15 min · Anyone can do it
Poor figures everywhere, on any SIM?
Then it's more likely the antenna or the modem than the network — a bench diagnosis tells you quickly which part gave in.